the-fix-it-man-repairs

Door Repair in Austin: Why Doors Stick, Drop and Refuse to Latch

Tue, 13 Oct 2026 14:33:52 GMT

Nine times out of ten door repair in Austin is not a door problem. The door was fine when it was hung. Something around it moved, or three screws worked loose, and now it catches on the frame every time the weather turns.

That matters because the fix is usually small and cheap once the cause is identified. Here is what actually goes wrong, and what we handle alongside it.

Quick Answers

Why does my door stick in summer?

Humidity swells wood, and slab movement in Austin clay shifts frames seasonally. A door that only sticks part of the year is usually telling you about the frame.

Can a dropped door be fixed without replacing it?

Nearly always. A dropped door is normally three stripped hinge screws, and longer screws into the framing pull it straight back up.

Why will it not latch?

The strike plate and the latch are no longer lined up. Moving the plate a fraction usually fixes it, and that takes minutes.

Is it worth finding someone local?

Searching for a door repair near me pays off in Austin, because seasonal slab movement here is a local pattern rather than a general one.

What Actually Makes a Door Fail

A door has to stay square inside a frame that is attached to a house that moves. In Austin, the house moves more than people expect.

Where is the fault usually?

Six causes cover almost every sticking or dropping door.

Stripped hinge screws: the top hinge takes the most load, its short screws lose grip in soft jamb timber, and the door tips.
Frame movement: seasonal slab movement in Austin clay racks the opening slightly out of square.
Swelling and shrinking: wood takes on moisture in humid months and gives it back in dry ones.
Strike plate drift: the latch and the plate stop lining up, so the door bounces back instead of catching.
Paint build-up: years of coats on the edge of a door close a gap that was designed to be there.
Loose or wrong hardware: a worn latch or a handle fitted to the wrong backset never works reliably.

Only one of those is fixed by a new door, which is why we look at the frame first on every Austin call before quoting one.

Doors, Screens and What Goes With Them

Door work in Austin rarely arrives alone. The same visit usually takes in the screen door, the hardware and whatever else has stopped working near it.

What do we handle?

This is the door and window side of the service.

Fixture installation Round Rock, TX and Austin customers book covers the small things too: towel bars, toilet paper holders, paper towel holders, hooks, and mailbox repair or replacement.

What to Check Before You Call

Some of this you can diagnose in two minutes, which makes the call shorter and the quote more accurate anywhere in Austin.

What should you look at?

Six checks tell us most of what we need.

Where it catches: top corner, bottom corner or along the latch edge. Each points somewhere different.
The gap around the door: an even gap means the door is fine and the hardware is not.
The top hinge screws: if you can turn one with a screwdriver by hand, that is your answer.
Whether it is seasonal: a door that sticks only in August is a moisture and movement story.
The strike plate: look for a shiny scrape where the latch has been hitting the plate instead of entering it.
Other doors in the house: if several have moved the same way, the frame is not the whole story.

Anyone searching for a handyman near me for a door should send a photo of the gap. It usually decides the job before anyone arrives.

Why a Small Repair Is Worth Doing Now

Doors are the repairs people put off longest, and they are also among the cheapest to put right if they are caught early.

What happens if you wait?

Six things get worse rather than staying the same.

Hinge damage: a door hanging on stripped screws chews out the jamb until it needs filling and redrilling.
Frame wear: a sticking door wears a groove in the frame that then has to be planed or patched.
Security: a deadbolt that does not throw fully is not doing its job.
Energy: an exterior door that does not seal costs you through a Central Texas summer.
Damage to the door face: forcing a stuck door cracks panels and splits stiles.
More trades needed: left long enough, a door job becomes a door, frame and trim job.

Mark has been building, repairing and remodeling since the 1980s, and small Austin repairs other pros skip are exactly the work this business was built on.

Book Door Repair in Austin

Send a photo of the door, the gap around it and the strike plate. Most of the time we can tell you whether it is a ten minute fix or a real job before we drive over.

The Fix It Man Repairs, serving Cedar Park, Austin, Round Rock, Pflugerville, Leander and West Lake Hills, Texas. Call Mark on (737) 888-1551 or email mark@thefixitmanrepairs.com, and the Request a Repair form reaches us any time.

Call Mark on (737) 888-1551 to book door repair in Austin.

Something else on the list? See our handyman services .

Quick Summary

Doors in Austin mostly fail because of what is around them rather than the door itself. The usual causes are stripped hinge screws at the top hinge, seasonal frame movement in Central Texas clay, wood swelling and shrinking with humidity, a strike plate that has drifted out of line with the latch, paint build-up on the door edge, and worn or wrong hardware. Before calling, check where the door catches, whether the gap is even, whether the top hinge screws turn by hand, whether the problem is seasonal, and whether the strike plate shows a scrape. Left alone, a small door fault chews out the jamb, wears the frame, weakens security, leaks conditioned air and eventually turns into a door, frame and trim job. The Fix It Man Repairs handles door hanging, repair and removal, screen door replacement and repair, door hardware, deadbolts, mini blind and shutter installation, and small fixtures including towel bars, hooks and mailboxes.

Key Takeaways

Most dropped doors are three stripped screws in the top hinge, nothing more.
A door that only sticks in summer is telling you about moisture and movement.
If the gap around the door is even, the fault is the hardware, not the hanging.
A strike plate moved a fraction usually fixes a door that will not latch.
Years of paint on a door edge close a gap that was designed in.
Forcing a stuck door cracks panels and turns a small job into a big one.
Send a photo of the gap and the strike plate before booking anything.

Frequently Asked Questions

Interior Repairs in Austin: Drywall, Texture, Tile and the Paint After

Mon, 12 Oct 2026 14:55:03 GMT

Nobody judges interior repairs in Austin by the patch. They judge them by whether they can still see where the patch was, six months later, in afternoon light. That is a finishing problem, and it is where most drywall repair goes wrong.

The patch itself is the easy part. Here is what actually decides whether a repair disappears, and what we handle alongside it.

Quick Answers

Why can I still see the old patch?

Either the texture was not matched or the paint sheen differs. Both are finishing steps, and skipping either leaves a visible rectangle on an Austin wall.

Do I have to paint the whole wall?

Usually yes, corner to corner. Paint fades and a touch-up in the middle of a wall shows as a patch even in the same color.

Can texture be matched?

Orange peel and knockdown can be sprayed to match closely. It takes a test board and the right tip, not a can of spray from a hardware store.

Should I look for someone local?

Searching for a drywall repair near me helps in Austin, because texture styles run in neighborhoods and a local hand has already matched yours before.

Why Drywall Repairs Show

A drywall patch in Austin can be structurally perfect and still look obvious, because what you see is the surface around it rather than the repair.

What gives a repair away?

Six things make a patch visible.

Texture mismatch: an untextured patch on a textured wall reads as a flat panel from across the room.
Feathering too tight: compound has to be spread wide and thin, not built up over the hole.
Sheen difference: flat, eggshell and satin reflect differently, so the wrong sheen shows even in the right color.
Color drift: the existing paint has faded, so the original tin no longer matches what is on the wall.
Sanding marks: over-sanded edges leave a halo that appears only once paint goes on.
Priming skipped: fresh compound soaks up paint differently, which shows as a dull patch.

This is why interior painting Cedar Park, TX and Austin clients book usually follows repair work rather than standing on its own. A patch and a paint job are really one job with two halves, and separating them is what leaves a wall looking repaired rather than finished.

Matching Texture and Finish

Central Texas walls are textured far more often than not, and getting that right is most of the job on any interior repair in Austin.

How is it done properly?

Each finish needs its own approach.

Older Austin homes bring one more consideration: if it was built before 1978 the EPA renovation and painting rules are worth knowing about before anything is sanded.

What Counts as Interior Repair Here

Interior work covers more than drywall, and grouping it into one visit is usually cheaper than booking each item separately across Austin.

What is on the list?

Six categories cover the interior side.

Drywall: patching, installation and wall repair, from doorknob dents to full sheets.
Walls: removal and building, when a room needs to change shape rather than be patched.
Texture: ceiling and wall texture spraying, matched to what is already there.
Tile: repair and installation, including the cracked ones nobody wants to touch.
Brick repair: interior brickwork brought back rather than covered up.
Hanging: pictures and mirrors put up properly, into something that will hold them.

Anyone searching for a handyman near me for drywall should ask whether texture and paint are included, because a bare patch is only half a repair.

Painting and Finishing

Paint is the last step and the one everybody sees, so it is worth treating as part of the repair rather than a separate decision.

What does finishing include?

Six finishing items complete an interior job.

Room painting: walls taken corner to corner so nothing reads as a patch.
Touch-ups: on rooms and molding, where a full repaint is not warranted.
Molding installation: baseboards, casings and trim that give a room a finished edge.
Priming: over fresh compound, so the patch does not flash through the topcoat.
Sheen matching: picking the finish that matches the rest of the room, not just the color.
Cleanup: dust contained and the room left usable, which on a sanding job matters a lot.

Our handyman services set out the full list, and the project gallery shows how the finished work looks across Austin and the surrounding towns.

Book Interior Repairs in Austin

Send a photo of the damage and a wider shot of the wall it sits in. The second photo is the one that tells us about texture, sheen and whether the whole wall needs painting.

Call Mark on (737) 888-1551 to book interior repairs in Austin.

Several rooms on the list? Start with our handyman services .

Quick Summary

Interior repairs are judged on the finish rather than the patch. A repair shows when the texture is not matched, the compound is not feathered wide enough, the paint sheen differs, the existing color has faded, the sanding leaves a halo or the fresh compound was not primed. Orange peel and knockdown can both be sprayed to match with a test board and the right tip, smooth walls are the hardest to hide, and ceiling texture is usually better done across the whole plane. Painting a wall corner to corner is normally the right call rather than touching up the middle. The Fix It Man Repairs handles drywall patching and installation, wall repair, removal and building, ceiling and wall texture spraying, tile repair and installation, brick repair, picture and mirror hanging, room painting, touch-ups on rooms and molding, and molding installation. Older Austin homes built before 1978 bring lead-safe renovation rules worth knowing about.

Key Takeaways

A patch is judged by whether you can still see it, not by how strong it is.
Texture matching is the step most drywall repairs skip and most people notice.
Paint sheen shows a repair even when the color is exactly right.
Paint corner to corner, because a touch-up mid-wall reads as a patch.
Fresh compound needs priming or it flashes dull through the topcoat.
Knockdown texture is about timing the knock-back, not about the spray.
Homes built before 1978 bring lead-safe rules into any sanding job.

Frequently Asked Questions

Cabinet Installation in Pflugerville: Getting It Level and Keeping It There

Mon, 12 Oct 2026 14:32:32 GMT

Every cabinet installation in Pflugerville comes down to two questions nobody asks until something falls off the wall: what is behind the drywall, and how much does the thing weigh when it is full. Cabinets are not heavy empty. They are very heavy loaded.

The same is true of shelving, closet organizers and garage racks. Here is what actually holds them up, and what to settle before anything gets screwed to a wall.

Quick Answers

Do cabinets have to go into studs?

Upper cabinets do. Anchors alone are not enough for a loaded cabinet in a Pflugerville kitchen, and this is the single most common shortcut we are called out to correct.

How much weight can a shelf hold?

It depends on the bracket, the fixing and the wall, not the shelf. The board is almost never the limiting part.

Can you install cabinets I bought elsewhere?

Yes. Supplying your own units is common, and installation is its own job regardless of where the boxes came from.

Is a local installer worth looking for?

Searching for a cabinet installer near me is worth the effort, because a short trip back for one adjustment is far easier to arrange locally.

What Holds a Cabinet on the Wall

A wall cabinet in Pflugerville is carrying dishes, tins and glassware, and all of that load runs through a handful of screws into whatever is behind the drywall.

What has to be right?

Six things decide whether a cabinet stays put.

Stud location: uppers must be screwed into framing. Finding the studs properly is the job, not a formality.
A level ledger line: cabinets are hung to a line, not to the floor or the ceiling, because neither of those is level.
Correct screws: cabinet screws with a washer head, driven through the hanging rail, not drywall screws.
Shimming: almost no wall is flat, so cabinets get shimmed or the doors will never line up.
Joining the run: boxes are clamped and screwed to each other so the run behaves as one unit.
Doors and drawers last: hardware gets adjusted after the boxes are fixed, which is why a rushed job has crooked doors.

Get the ledger line and the studs right and the rest is finishing. Get them wrong and no amount of adjustment saves it.

Shelving, Closets and Garage Storage

Shelving installation Leander, TX and Pflugerville clients ask for ranges from a single floating shelf to a garage wall of racking, and the fixing changes completely between them.

What goes where?

Match the fixing to the load, not to the look.

We handle garage shelving, shelf installation, shelf repair, closet organizer installation and repair, closet door and mirror closet door installation, and general assembly.

Where Cabinet Jobs Go Wrong in Pflugerville

Most of the cabinet work we are called to fix was not badly built. It was hung on a bad assumption, and the same handful come up again and again.

What are the common mistakes?

Six mistakes account for most of the callbacks.

Hung to the ceiling: ceilings are not level, so a cabinet run hung to one comes out wrong at the far end.
Anchors instead of studs: drywall anchors hold a picture, not a loaded upper cabinet.
No shimming: the run follows the bow in the wall and the doors never sit flush.
Filler pieces skipped: a cabinet tight into a corner means a drawer that cannot open.
Appliance clearances ignored: the range or the fridge needs its gap, and that has to be planned before anything is fixed.
Nothing checked for plumb: a level box on an out-of-plumb wall still ends up with a door that swings shut.

Anyone searching for a handyman near me for cabinet work should ask how the installer finds studs and sets the level line. The answer tells you a lot.

What We Do Around Pflugerville

Handyman services Cedar Park, TX residents book from us cover the same list across Pflugerville, and cabinets and storage are a steady share of it.

What is included?

Six categories cover the storage side of the work.

Cabinet hanging and installation: kitchen, bathroom, laundry and garage, whether we supply them or you do.
Cabinet repair: doors that will not close, loose hinges, damaged rails and split frames.
Cabinet removal: taking out old units cleanly, including hauling them away.
Closet doors: standard and mirror closet door installation, including tracks and guides.
Closet organizers: installation and repair of the systems that turn a closet into storage.
Garage shelving and general assembly: racking, shelves and flat-pack furniture put together properly.

Our handyman services list the rest, and the project gallery shows the finished work.

Book Cabinet or Shelving Work in Pflugerville

Send a photo of the wall and tell us what is going on it. We will tell you what it needs behind the drywall and whether the plan works before anything gets drilled.

The Fix It Man Repairs, serving Cedar Park, Austin, Round Rock, Pflugerville, Leander and West Lake Hills, Texas. Call Mark on (737) 888-1551 or email

mark@thefixitmanrepairs.com

The Request a Repair form reaches us any time.

Call Mark on (737) 888-1551 to book cabinet installation in Pflugerville.

Have units already? Start with our handyman services and tell us the sizes.

Quick Summary

Cabinets and shelving fail for the same reason: the fixing does not match the load. Upper cabinets must go into wall studs, hung to a level ledger line rather than to the floor or ceiling, using cabinet screws through the hanging rail, shimmed to the wall, joined into one run and adjusted at the doors last. Shelving needs the fixing matched to the job, from a concealed bracket into a stud for a light floating shelf through to framing fixings spread across studs for garage racking. The common mistakes in Pflugerville are hanging to the ceiling, relying on drywall anchors, skipping shims and fillers, ignoring appliance clearances and never checking plumb. The Fix It Man Repairs handles cabinet hanging, installation, repair and removal, closet doors and mirror closet doors, closet organizers, garage shelving, shelf installation and repair, and general assembly.

Key Takeaways

Upper cabinets belong in studs; drywall anchors are not a substitute.
Cabinets are hung to a level line, never to the floor or the ceiling.
A cabinet is light empty and heavy loaded, and the fixing must suit loaded.
Shimming is what makes doors line up on a wall that is not flat.
The bracket and the fixing set a shelf load, not the shelf board.
Filler pieces and appliance clearances get planned before anything is fixed.
Ask an installer how they locate studs and set the level line.

Frequently Asked Questions

Handyman Services in Cedar Park: What to Hire For and What to Check

Mon, 12 Oct 2026 11:53:36 GMT

Most people book handyman services in Cedar Park for one job and then remember eleven more once someone is standing in the hallway with a drill. The single job was never the point. The list was.

Knowing what does and does not belong on that list saves everyone time. Here is what handyman work covers in Central Texas, and how to judge who you are hiring.

Quick Answers

Does Texas license handymen?

Texas has no state-level general contractor or handyman license. Certain trades are licensed separately, which is the distinction that actually matters.

Is there a minimum job size?

Not with us. No job is too small when it needs to be done right, and small repairs other trades skip are a large part of the work.

Should I save jobs up?

Yes. One visit covering eight small items in Cedar Park is far better value than eight separate call-outs.

Does hiring locally matter?

Searching for a handyman near me is sensible in Cedar Park, because travel time is part of what you pay for on a small job.

What a Handyman Can and Cannot Do in Texas

This is the part worth understanding before you hire anyone in Cedar Park, because it is written into state law rather than left to opinion.

Where is the line?

Texas licenses trades, not general repair work.

The TDLR and the Texas State Board of Plumbing Examiners publish the licensed trades. Anyone offering to rewire a Cedar Park house as a handyman is telling you something useful about themselves.

How to Judge a Handyman Before Booking

With no state license to check, the assessment falls to you, and six questions do most of the work in Cedar Park.

What should you ask?

Six questions separate a tradesman from a business card.

How long have you been doing this: experience shows up in diagnosis, not in the drilling.
Will you look before quoting: a number given over the phone without photos is a guess.
Do you do removal and hauling: otherwise the old material stays in your garage.
What do you not do: an honest answer here is worth more than a long capability list.
Can I see finished work: a gallery of actual jobs beats a stock photo every time.
Who actually turns up: with a one-man business the answer is simple, which is part of the appeal.

Anyone searching for a handyman near me in Cedar Park should ask the fourth one especially. It tells you whether you are dealing with someone who knows their limits.

The Full Service List

Interior repairs Austin, TX clients book and exterior projects Round Rock, TX homeowners need come out of the same van, and the range is wider than most people expect.

What does the list cover?

Six groups cover everything we do across Cedar Park and the surrounding towns.

Exterior: fences, gates, decks and patio covers, built, repaired or removed.
Doors, windows and fixtures: door hanging and repair, screen doors, blinds, shutters, hardware, deadbolts, hooks, holders and mailboxes.
Cabinets, storage and shelving: cabinet hanging and repair, closet doors, closet organizers, garage shelving and general assembly.
Interior repairs: drywall, wall repair, wall removal and building, texture spraying, tile and brick repair, picture and mirror hanging.
Painting and finishing: room painting, touch-ups on rooms and molding, and molding installation.
Cleaning, hauling and delivery: pressure washing for houses and porches, trash removal, and pickup or delivery of large items.

That last group is the one people forget exists, and it is often the reason a job gets finished rather than half finished.

Why the Small Jobs Matter

The repairs that get skipped are rarely skipped because they are hard. They are skipped because they are small, and Cedar Park is full of them.

What gets left undone?

Six jobs sit on lists for years.

The door that sticks: lived with seasonally rather than fixed in twenty minutes.
The shelf never hung: still in its box because nobody wants to find the studs.
The patch behind the door: a doorknob hole covered by furniture instead of repaired.
The gate that drags: lifted over the path every single time rather than re-hung.
The mailbox leaning: noticed by everyone who visits and fixed by nobody.
The stuff to be hauled: an old deck, a broken dryer, a pile that needs a truck.

Mark has been building, repairing and remodeling since the 1980s, and our about us section explains the approach: dependable results, clear communication and a straightforward way of working.

Get Your Cedar Park List Sorted

Write down everything on the list, including the small items you assume are not worth a call-out. Send it over with a few photos and we will tell you what can be done in one visit.

Call Mark on (737) 888-1551 and read the list out. That is usually the fastest way.

Want the detail first? See our handyman services .

Quick Summary

Texas has no state-level general contractor or handyman license, but electrical work, plumbing, air conditioning and refrigeration, and irrigation all require state licenses, issued by TDLR and the Texas State Board of Plumbing Examiners, and structural work needs a city permit. With no license to check, judge a handyman on how long they have worked, whether they look before quoting, whether removal and hauling are included, what they openly do not do, whether they can show finished work, and who actually turns up. The Fix It Man Repairs covers exterior work on fences, gates, decks and patio covers; doors, windows and fixtures; cabinets, storage and shelving; interior repairs including drywall, texture, tile and brick; painting and finishing including molding; and cleaning, hauling and delivery including pressure washing and trash removal. Mark has been building, repairing and remodeling since the 1980s, and no job is too small when it needs to be done right.

Key Takeaways

Texas issues no statewide handyman or general contractor license.
Electrical, plumbing, HVAC and irrigation are licensed trades in Texas.
Ask a handyman what they do not do; the honest answer tells you most.
A quote given over the phone with no photos is a guess, not a price.
Check whether removal and hauling are included before comparing prices.
Saving up eight small jobs for one visit beats eight separate call-outs.
Pressure washing, trash removal and hauling are part of the service here.

Frequently Asked Questions

Exterior Projects in Round Rock: Fences, Gates, Decks and Patio Covers

Mon, 12 Oct 2026 09:10:23 GMT

Most exterior projects in Round Rock start with someone deciding the whole fence has to go. Then a closer look finds four bad posts, twenty good pickets and a gate that was hung wrong in 2015. The replacement quote and the repair quote are not remotely the same number.

Central Texas is hard on anything made of wood and left outside. Here is how these things actually fail around Round Rock, and what is worth fixing before you replace.

Quick Answers

Can a leaning fence be repaired?

Usually yes. Most leaning fences in Round Rock have sound pickets and rotted posts, and posts can be replaced without touching the rest of the run.

How long should a cedar fence last here?

It depends far more on the posts and the drainage than on the pickets. Sun and the wet-dry swing of Central Texas clay do most of the damage.

Do I need a permit?

It depends on the city and the project. Round Rock and its neighbors each set their own rules, so check before you build rather than after.

Is a local contractor worth searching out?

Searching for a deck repair near me is worth it here, because a contractor who works this soil every week already knows how the clay behaves.

Why Fences and Gates Fail Around Round Rock

A fence almost never fails evenly. It fails at six points, and knowing which one you have decides whether this is a repair or a rebuild.

Where does the damage start?

Six failure points cover nearly every fence in Round Rock.

Post rot at grade: the post is sound above and below, and gone right at soil level. That is where water sits.
Concrete that holds water: a post set in a concrete cup with no drainage rots faster than one set in gravel.
Clay movement: the shrink and swell of Central Texas soil levers posts out of plumb over a few dry summers.
Gate sag: gates are the first thing to fail because they carry their weight on hinges rather than on the ground.
Rail pull-out: nails back out of rails with seasonal movement and a whole section goes loose at once.
Sun on one side: the west-facing run of a fence ages years ahead of the rest, which is why fences fail in patches.

We do fence building, fence repair, fence removal and the same three for gates, so the answer is not automatically the expensive one.

Decks: What to Check Before You Spend

Deck repair West Lake Hills, TX homeowners ask about usually comes down to the structure under the boards rather than the boards you can see, and the same is true across Round Rock.

What actually matters structurally?

Check these before deciding to resurface or rebuild.

The ledger and the railings are the two that matter for safety, and the Consumer Product Safety Commission has published on deck collapses for exactly that reason.

Patio Covers and Shade That Lasts

Outdoor patio remodeling Cedar Park TX and Round Rock clients ask for is nearly always about shade, and shade is a structural problem before it is a style one.

What should you settle first?

Six decisions shape a patio cover in Round Rock more than the finish does.

Attached or free standing: attaching to the house means flashing and a ledger, which is where leaks start if it is done casually.
Span and posts: a wider clear span needs bigger beams, and that changes the look as much as the cost.
Roof pitch and drainage: water has to go somewhere that is not your foundation.
Afternoon sun: west exposure is the one that makes a patio unusable here, so orientation beats square footage.
Wind: summer storms come through hard, and the Austin and San Antonio weather office is worth a look before you plan.
Permits: a structure attached to the house is treated differently from a freestanding one in most cities.

We build, repair and remove patio covers, so if the existing one is worth saving we will tell you.

What We Handle Outside

Mark has been building, repairing and remodeling since the 1980s, and exterior work is a large share of what comes in across Round Rock and the surrounding towns.

What is on the list?

Six categories cover the exterior side of the business.

Fences: building, repair and removal, including single-post fixes rather than whole runs.
Gates: building, repair and removal, including re-hanging a gate that has dropped.
Decks: building, repair and removal, boards through to structure.
Patio covers: installation, repair and removal.
Pressure washing: houses and porches, which often changes the answer about whether something needs replacing.
Hauling: trash and old material removed rather than left stacked by the driveway.

Anyone searching for a handyman near me for outdoor work should ask whether removal and hauling are included, because that is where a cheap quote gets expensive. Our project gallery shows the kind of work this covers.

Talk to Us About Your Round Rock Exterior Project

Send a couple of photos of the fence line, the deck or the patio and we will tell you honestly whether it is a repair or a replacement. No job is too small when it needs to be done right.

Call Mark on (737) 888-1551 to walk through an exterior project in Round Rock.

Not sure where it stands? Start with our handyman services .

Quick Summary

Exterior work in Round Rock fails in predictable places. Fences go at the posts rather than the pickets, usually from rot at soil level, concrete that traps water, clay movement, sagging gates, rails pulling loose and sun damage concentrated on the west-facing run. Decks should be judged on the structure rather than the surface: boards are usually replaceable, but joists, the ledger board, posts and footings, railings and stair stringers decide whether a rebuild is needed, and the ledger and railings are the safety items. Patio covers turn on whether they attach to the house, the span and post sizes, roof pitch and drainage, afternoon sun exposure, wind and local permits. The Fix It Man Repairs builds, repairs and removes fences, gates, decks and patio covers, and also pressure washes and hauls away old material. Mark has been building, repairing and remodeling since the 1980s.

Key Takeaways

Fences almost always fail at the posts, not the pickets, so price the repair first.
Post rot happens at soil level, where water sits against the wood.
Central Texas clay movement levers posts out of plumb over a few dry summers.
Judge a deck by its joists, ledger and footings rather than its surface boards.
The ledger board and the railings are the parts that matter for safety.
A patio cover attached to the house needs proper flashing or it will leak.
Ask whether removal and hauling are in the quote before you compare prices.